联系我们

名称:广州空压机匠心厂

电话:xxx

手机:xxx

邮箱:xxx

地址:xxx

新闻动态
空压机工作原理:
空压机工作原理:
Working principle of air compressor:
当启动装置开启后, 电动机进入正常运转, 通过三角皮带轮带动压缩机曲轴,再通过连杆和十字头,使活塞在气缸内作往复直线运动。当活塞由外止点向内止点开始移动时, 气缸内侧活塞外侧处于低压状态,气体通过近期阀进入汽缸, 当活塞由内止点向外止点移动时, 进气阀关闭,气缸内的气体则被压缩而提高压力。当压力超过排气阀外唐山刷房 保定网站建设 保定强夯 卷扬式启闭机  保定网站制作 收费岛模具 遮阳网 麻绳气体压力时,排气阀打开,开始排出压缩气体,当活塞到达外止点时排气完毕。气体经过一级气缸压缩再经中间冷却器冷却后,进入二级缸,同样被压缩后进入储气罐,以备使用。
When the starting device is turned on, the motor enters normal operation, drives the compressor crankshaft through the triangular belt pulley, and then makes the piston move back and forth in a straight line in the cylinder through the connecting rod and crosshead. When the piston starts to move from the outer dead center to the inner dead center, the outside of the piston inside the cylinder is in a low-pressure state, and the gas enters the cylinder through the near-term valve. When the piston moves from the inner dead center to the outer dead center, the inlet valve is closed, and the gas in the cylinder is compressed to increase the pressure. When the pressure exceeds the gas pressure outside the exhaust valve, the exhaust valve opens and begins to discharge the compressed gas. When the piston reaches the outer dead center, the exhaust is completed. After being compressed by the primary cylinder and cooled by the intercooler, the gas enters the secondary cylinder. After being compressed, it enters the air storage tank for use

联系方式

  1. 名称:广州空压机匠心厂
  2. 电话:xxx
  3. 手机:xxx
  4. 邮箱:xxx
  5. 地址:xxx

版权 ©  广州空压机匠心厂 网址:www.liushuicaomj.cn  推荐:广州空压机,广州永磁变频螺杆机,广州空压机维修保养

超声波发生器 天津除甲醛 沟盖板模具 网站建设及优化保定遨游网络公司